Cisco

From My notepad
Jump to: navigation, search

Caller ID Name Delivery Issues on Cisco IOS Gateways

Chapter 10: Digit Manipulation

Cisco IOS Voice Troubleshooting and Monitoring -- Digital Voice-Port Configuration Verification

Basic SIP Configuration

Cisco Fax Services over IP Application Guide

4. Configuring T.38 Fax Relay

Configuring SIP Support for Hookflash

Understanding Inbound and Outbound Dial Peers Matching on IOS Platforms

Certification Material

Router Alley Guides and Labs

MPLS, VRF and BGP between a Cisco and a Mikrotik

!
!
ip vrf c1
 description Custom #1 VRF
 rd 1:1
 route-target export 1:1
 route-target import 1:1
!
ip vrf c2
 description Custom #2 VRF
 rd 1:2
 route-target export 1:2
 route-target import 1:2
!
!
mpls label protocol ldp
!
!
interface Loopback0
 description MPLS Backbone Loopback Interface
 ip address 172.16.0.1 255.255.255.255
!
interface Loopback1
 description Customer #1 Local Loopback Interface (used for testing)
 ip vrf forwarding c1
 ip address 10.0.1.1 255.255.255.255
!
interface Loopback2
 description Customer #2 Local Loopback Interface (used for testing)
 ip vrf forwarding c2
 ip address 10.0.2.1 255.255.255.255
!
interface FastEthernet0/0
 ip address 1.1.1.1 255.255.255.252
 duplex full
 speed 100
 mpls ip
!
interface FastEthernet0/1
 ip vrf forwarding c1
 ip address 10.2.0.1 255.255.255.252
 duplex full
 speed 100
!
router ospf 1
 router-id 172.16.0.1
 log-adjacency-changes
 network 0.0.0.0 255.255.255.255 area 0
!
router bgp 1
 no synchronization
 bgp log-neighbor-changes
 neighbor 172.16.0.2 remote-as 1
 neighbor 172.16.0.2 update-source Loopback0
 no auto-summary
 !
 address-family vpnv4
 neighbor 172.16.0.2 activate
 neighbor 172.16.0.2 send-community both
 exit-address-family
 !
 address-family ipv4 vrf c2
 redistribute connected
 redistribute static
 no auto-summary
 no synchronization
 exit-address-family
 !
 address-family ipv4 vrf c1
 redistribute connected
 redistribute static
 no auto-summary
 no synchronization
 exit-address-family
!
!
/interface bridge
add name=bridge-loopback-mpls-core
add name=bridge-loopback-vrf-c1
add name=bridge-loopback-vrf-c2
/routing bgp instance
set default as=1 client-to-client-reflection=yes comment="" disabled=no \
    ignore-as-path-len=no name=default out-filter="" redistribute-connected=\
    no redistribute-ospf=no redistribute-other-bgp=no redistribute-rip=no \
    redistribute-static=no router-id=0.0.0.0 routing-table=""
/routing ospf instance
set default comment="" disabled=no distribute-default=never in-filter=ospf-in \
    metric-bgp=auto metric-connected=20 metric-default=1 metric-other-ospf=\
    auto metric-rip=20 metric-static=20 name=default out-filter=ospf-out \
    redistribute-bgp=no redistribute-connected=no redistribute-other-ospf=no \
    redistribute-rip=no redistribute-static=no router-id=172.16.0.2
/routing ospf area
set backbone area-id=0.0.0.0 comment="" disabled=no instance=default name=\
    backbone type=default
/ip address
add address=1.1.1.2/30 broadcast=1.1.1.3 comment="" disabled=no interface=\
    ether1 network=1.1.1.0
add address=172.16.0.2/32 broadcast=172.16.0.2 comment="" disabled=no \
    interface=bridge-loopback-mpls-core network=172.16.0.2
add address=10.0.1.2/32 broadcast=10.0.1.2 comment="" disabled=no interface=\
    bridge-loopback-vrf-c1 network=10.0.1.2
add address=10.0.2.2/32 broadcast=10.0.2.2 comment="" disabled=no interface=\
    bridge-loopback-vrf-c2 network=10.0.2.2
add address=10.10.20.4/24 broadcast=10.10.20.255 comment="" disabled=yes \
    interface=ether3 network=10.10.20.0
/ip route vrf
add comment="" disabled=no export-route-targets=1:1 import-route-targets=1:1 \
    interfaces=bridge-loopback-vrf-c1,ether3 route-distinguisher=1:1 \
    routing-mark=vrf-c1
add comment="" disabled=no export-route-targets=1:2 import-route-targets=1:2 \
    interfaces=bridge-loopback-vrf-c2 route-distinguisher=1:2 routing-mark=\
    vrf-c2
/mpls
set dynamic-label-range=16-1048575 propagate-ttl=yes
/mpls interface
add comment="" disabled=no interface=all mpls-mtu=1508
/mpls ldp
set distribute-for-default-route=no enabled=yes hop-limit=255 loop-detect=no \
    lsr-id=172.16.0.2 path-vector-limit=255 transport-address=172.16.0.2 \
    use-explicit-null=no
/mpls ldp interface
add accept-dynamic-neighbors=yes comment="" disabled=no hello-interval=5s \
    hold-time=15s interface=ether1 transport-address=172.16.0.2
/routing bgp instance vrf
add disabled=no in-filter="" instance=default out-filter="" \
    redistribute-connected=yes redistribute-ospf=no redistribute-other-bgp=\
    yes redistribute-rip=no redistribute-static=yes routing-mark=vrf-c1
add disabled=no in-filter="" instance=default out-filter="" \
    redistribute-connected=yes redistribute-ospf=no redistribute-other-bgp=\
    yes redistribute-rip=no redistribute-static=yes routing-mark=vrf-c2
/routing bgp peer
add address-families=vpnv4 as-override=no comment="" default-originate=never \
    disabled=no hold-time=3m in-filter="" instance=default multihop=no name=\
    peer1 nexthop-choice=default out-filter="" passive=no remote-address=\
    172.16.0.1 remote-as=1 remove-private-as=no route-reflect=no tcp-md5-key=\
    "" ttl=default update-source=172.16.0.2 use-bfd=no
/routing ospf network
add area=backbone comment="" disabled=no network=0.0.0.0/0

T1 Controller Information

show service-module 
show controllers T1

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox